Grab Plus is a non hazardous cleaning paste which absorbs dirt while it dries to a tough film. It is easily removed by lifting an edge and pulling it off. The dirt and grime is removed with the film. Suitable for all surfaces excluding polished stone and marble. Advantages Controlled Cleaning Removes dust,soot and oils Low odour Low toxicity No need to rinse

A powerful and easy to use oil and grease stain remover, fast and effective, suitable for most masonry. A Step-By-Step for How to Remove Old Oil Stains from Driveways and Garage Floors The Oil & Grease Stain Remover is specifically formulated to pull up stubborn oil and grease stains from pavers, concrete, and other porous surfaces and it doesn’t require any mixing or...

Designed to remove solubilised deep seated copper sulphate stains and draw staining elements out of the masonry and into the poultice mix. The poultice is then scraped from the surface and the masonry is cleaned with a water wash.

Removes deep seated rust and other troublesome metallic stains from masonry and stone surfaces including driveways, walkways, patios and commercial floors. It is a thick, creamy poultice paste which is suitable for trowel application to brick, tile, concrete and most natural stone.

A ready to use non acidic blend of alkaline cleaning compounds, detergents and clays in paste form. Designed for removal of moderate to severe atmospheric staining, 1260 Poultice is appropriate for use on exterior or interior masonry surfaces. 1260 Poultice is manufactured to a creamy paste consistency suitable for trowel or airless spray application. Safe for use on polished or unpolished marble...

An alkaline paste designed for removal of severe atmospheric staining and for controlled removal of paint from masonry surfaces.

Safely removes surface and deep seated staining from polished stone and porous masonry surfaces. This odourless, non acidic blend of dry absorbent clays and biodegradable detergents, will not etch or discolour marble, limestone or other acid sensitive surfaces. Marble poultice is a smooth paste suitable for trowel application to horizontal, vertical and overhead surfaces.

A non hazardous synthetic latex cleaning compound for removal of surface soiling. After the product has been applied and left to dwell, it will dry to a skin which can be easily peeled off.